Issue #316: Create Rotate tool (dismine/valentina)


#1

New issue 316: Create Rotate tool https://bitbucket.org/valentinateam/valentina/issue/316/create-rotate-tool

Susan Spencer:

Rotation of points is a very important aspect of patternmaking.

It’s used in making darts and many other patternmaking methods.

The tool would prompt for a center point (rotation point), the point to be rotated, an angle, and direction (clockwise, counterclockwise).

It would be best if the angle could be specified as either an angle in degrees, or a function which retursn the angle of a vector given by three points. e.g. -

angle(A1, A, A2) where A is the center point of the vector, and A1 & A2 are on ‘rays’ of the vector, the angle is < 180


#2

This tool would make a new point, not move an existing point.On Wed, Jun 17, 2015 at 4:00 PM, Susan Spencer issues-reply@bitbucket.org wrote:

New issue 316: Create Rotate tool https://bitbucket.org/valentinateam/valentina/issue/316/create-rotate-tool

Susan Spencer:

Rotation of points is a very important aspect of patternmaking.

It’s used in making darts and many other patternmaking methods.

The tool would prompt for a center point (rotation point), the point to be rotated, an angle, and direction (clockwise, counterclockwise).

It would be best if the angle could be specified as either an angle in degrees, or a function which retursn the angle of a vector given by three points. e.g. -

angle(A1, A, A2) where A is the center point of the vector, and A1 & A2 are on ‘rays’ of the vector, the angle is < 180

– You received this message because you are subscribed to the Google Groups “Valentina-project list” group. To unsubscribe from this group and stop receiving emails from it, send an email to valentina-project-list+unsubscribe@googlegroups.com. To post to this group, send email to valentina-project-list@googlegroups.com. Visit this group at http://groups.google.com/group/valentina-project-list. For more options, visit https://groups.google.com/d/optout.